Hex nut is a very common nut

April 26, 2023

The hexagonal nut in the Hardware Screws is the crystallization of the continuous practice of the working people in production and life.

First of all, the Screw Nut's hexagonal shape is for ease of use. On machines, nuts are sometimes not abundant enough, and the nut wrench space is quite small. You only need to turn the hexagon nut 60 degrees each time, you can slowly tighten the nut, and you need to turn the nut 90 degrees each time. That is to say, in order to tighten the nut, the hexagonal is smaller, but the octagonal nut is easy to slip due to the small contact surface with the wrench. Rarely used, so hexagonal nuts are easy to use. And look at the wrench. The handle and wrench of an ordinary wrench can be at a 30 degree Angle, so that when the nut is installed in a very narrow place and the wrench cannot move freely, the hexagonal nut is just a wrench to pull the nut. Turn the wrench upside down, pull the nut again, and pull it back and forth several times to tighten the nut.

Secondly, hex nuts are used to maximize the use of Hardware Tools. Because from a strength standpoint, larger nuts are sturdier than smaller nuts. In the past, nuts were usually ground from a round material. The same round bar is used to make hex nuts instead of using nut materials. A hexagon nut is made of a round bar of the same thickness, which is much larger than a nut.

Screw Nut

The above is the Hex nut is a very common nut we have listed for you. You can submit the following form to obtain more industry information we provide for you.

You can visit our website or contact us, and we will provide the latest consultation and solutions

Share to:

Send Inquiry

Previou:Hardware tools products usher in a new period of development

Next:How to choose the appropriate selection of stud ear studs